Car Audio Bass Blockers | Model #EC-200.0

Deciphering
Power Ratings
Peak, Max, and other
hyped wattage claims
refer to the amount of
power that a component
can generate or handle on
a momentary basis. The
unit, however, cannot
sustain this levelc
continuously.

RMS, Or
Continuous Watts
indicate how much power
can be exchanged on a
constant basis, at the
rated load, without
damaging the unit.

In most cases, the stated
Max or Peak power
is equal to roughly twice
the actual RMS power.
In the case of amplifiers,
always divide the power
by the number of
channels.

Gain & Volume
Keep the gain on your
amplifier below 65%
and the volume of the
receiver below 50% with
typical high amplitude
(loud) music.
This may help avoid
destructive clipping
distortion.


Wood Sculpture by R. LeBeaux	*Home - Products - Policies - Shipping - Ordering - Contact - Order Inquiry*			Site Navigation Home Policies Shipping Ordering Contact PRODUCTS Car Stereo Home Stereo Power Capacitors By Power Rating 1 To 2 Farads 2 To 5 Farads 6 To 10 Farads Above 10 Farads By Brand. Blitz Audio DHD Power Cruiser Kole Audio Lanzar Legacy Nitro BMW PowerAcoustik Pyle Pyramid SPL Vofenhag Xstatic Xstatic Batteries Wiring Accessories And Other Car Audio Products Antenna Boosters Antennas A/V Controllers Bass Blockers Batteries Capacitors Crossovers Dynamat Equalizers Fans (Cooling) FM Modulators Grills (Speaker) Interfaces Line Converters Modulators (FM) Noise Filters Power Inverters Power Supplies RCA Cables RCA Splitters Remote Controls Signal Boosters Sound Control Speaker Grills Vibration Control Wiring Kits


		Deciphering Power Ratings Peak, Max, and other hyped wattage claims refer to the amount of power that a component can generate or handle on a momentary basis. The unit, however, cannot sustain this levelc continuously. RMS, Or Continuous Watts indicate how much power can be exchanged on a constant basis, at the rated load, without damaging the unit. In most cases, the stated Max or Peak power is equal to roughly twice the actual RMS power. In the case of amplifiers, always divide the power by the number of channels. Gain & Volume Keep the gain on your amplifier below 65% and the volume of the receiver below 50% with typical high amplitude (loud) music. This may help avoid destructive clipping distortion.	Model # EC-200.0 Bass Blocker This is a non-polarized 200 microfarad capacitor rated at 100 volts DC. This will gently roll off frequencies below 135 Hertz by 12 dB. It is used to isolate regular source speakers from heavy bass which is handled by the bass system. It is easily installed in series with the + terminal on the speaker. List Price: $9.95 Ea. Our Price: $14.95 Pair powercaps.com Copyright © 1999 - 2006 powercaps.com. Use of any material appearing on this site without specific written permission from powercaps.com is is prohibitied by law. Website Designed & Maintained By MetroDirect Communications