|
|
Site | |||||||||||||||||||
|
Car
Audio Stiffening Capacitors | ||||||||||||||||||||
|
Like
it loud? Audio
capacitors store that necessary power your amplifier will need to
punch those big bass notes while limiting clipping (see definition at
lower right). They store power during intervals when it is not required,
which is most of the time, and release it when momentary peak demand
exceeds what is available from the car's power system. Along with an
adequate basic power supply, a stiffening capacitor for your amp is
the simplest way to be sure your system always gets every bit of current
it needs. From the smallest 0.5 farad, to the 3 farad model by Legacy,
there's a capacitor suitable for your installation. Mount them as close
to the amplifier as possible, and choose at least .5 farad (500,000
microfarads) per 500 watts RMS of power output. You can use as many
farads as you wish, but just the number indicated by the formula above
is all that is necessary. (PLEASE
NOTE: The term "digital" refers to a built-in digital
voltmeter on the capacitor. All capacitors are inherently analog devices,
otherwise) TWO TO FIVE FARADS
SIX TO TEN FARADS
ABOVE TEN FARADS
powercaps.com | ||||||||||||||||||||