|
|
Site | ||||||
|
Remote
Controls, Interfaces & Signal Boosters | |||||||
|
Features:
Price:
$25.95 (back
to top)
PAC Model #TURBO 1 - Preamp Signal Booster Increases the preamp level being delivered to the amplifiers. Increasing preamp level signal helps to better balance your system and allows you to get more 'juice' out of your amplifiers. S/N ratio of 96 dB for high quality sound Average draw less than 15 milliamps Adjustable from 0.1 to a 15dB increase As many as 10 amps can be driven off one Turbo 1 Price $44.95 (back
to top)
Remote Control Interfaces PAC Model #SW1-X - Steering Wheel Radio Control Interface This universal "learning" remote allows you to retain the use of steering wheel or rear seat radio controls when replacing the factory head unit. It will interface most aftermarket stereos into most vehicles with steering wheel or rear seat audio controls, and works with virtually all aftermarket radios with wireless infrared remote capability using the common 38-40kHz carrier frequency. It also retains the use of heater control buttons on GM vehicles. The SWI-X is so universal that you only need one SKU# to cover over 95% of the vehicles made from 1986 to current. New vehicles coming out every year? No problem! Never be stuck with a vehicle specific type interface. Works for all major brand radios, including Alpine, Kenwood, Pioneer, JVC, Sony, Clarion, Blaupunkt, Eclipse, Panasonic, Rockford, Sanyo or just about any other brand out there. You can assign the buttons on the steering wheel to any infrared function on the remote, so you are never stuck with specific functions you don't want. With select Alpine headunits, the SWI-X can be modified to directly plug into the remote port of the Alpine headunit. Covers Ford, GM, Chrysler / Dodge, Acura, Audi, BMW, Buick, Cadillac, Chevrolet, GMC, Honda, Hummer, Infiniti, Jaguar, Land Rover, Lincoln, Mazda, Mercury, Mitsubishi, Nissan, Oldsmobile, Pontiac, Saab, Toyota, Volkswagan, and Harley Davidson motor cycles. To view an application guide in PDF format, CLICK HERE Price $69.95 (back
to top)
PAC Model #OEM-2 - Factory Sound System Interface A one-piece solution for replacing the radio or adding an amplifier to any factory system. By isolating the system, providing a 4 channel signal level converter, an internal remote trigger and a common ground speaker conversion circuit, the OEM-2 is truly a multi-problem solution. Adjusts up to 4 channels of signal input from 2 to 60 watts Isolates the input and output circuits, blocking DC noise and preventing snaps, crackles and pops typical in other products. Sealed potentiometers prevent circuit-induced distortion and signal drift. Allows for conversion of floating ground head units to match common ground speakers systems. Provides an internal trigger to turn on a 2 amp/12 volt power line with a 1second delay for an amplifier or power antenna. Delivers linear frequency response /-0.5 dB from 20 to 20,000 Hz, for unparalleled sound quality. Price $39.95 (back
to top)
PAC Model #OS-1 - OnStar Interface OnStar® interface will plug into General Motors factory harness without having to cut or splice into the factory plug. The OS-1 incorporates a microcontroller that communicates directly with OnStar's serial data protocal to prevent false triggering thus eliminating unwanted audio noise through speakers. Onboard amplifier will drive two, 4 ohm speakers in stereo. Use with existing speakers in front doors or use external / separate speakers. 12 volt remote out to turn on factory amplifier and mute wire to attenuate the aftermarket stereo LED indicator and volume control Built in audio isolation circuit eliminates engine noise Will not false trigger. IMPORTANT
NOTE: The OS-1will not work with OnStar® equipped vehicles that
have factory radios with RDS (Class 2 headunits). Factory radio's with
RDS can be indendified by locating an RDS logo on the front face of
the factory radio. OS-1 currently supports trucks and SUV's from 1996-2001
and 1999-2002 Pontiac Gran Prix. but not the Grand Prix with Bose®s. PLEASE NOTE: All of our accessory products have a full factory warranty against any defect. However, since a wide range of configurations may be used or considered, and a variety of causes may be responsible for faulty operation of your equipment, we cannot guarantee that any device you purchase to ameliorate ongoing problems will be effective in all cases. Purchase of interfaces, noise filters, antenna & signal boosters, and other remedial or ancillary devices is at your own risk, and returns are not allowed.
powercaps.com | |||||||